Jumo 705040 mTRON T - Router Module Operating Manual Manual do Utilizador descarregar pdf (Página 34)

5 Installation

5.3 Installation/dismounting on DIN rail

All modules in the system are intended for installation on a DIN rail according to DIN EN 60715

(35mm×7.5mm×1mm).

The following must always be installed on the left, at the start of the DIN rail:

• A central processing unit or

• A router module

These modules connect the input/output modules to the voltage supply and the system bus.

NOTE!

To determine the required minimum width of the DIN rail, the widths of the individual modules

are to be added (see technical data of the modules in the respective data sheet or the

module-specific installation instructions).

The widths of the cover (17.5 mm) and both end brackets (each 9.5 mm) should also be

taken into consideration: 17.5 mm + 2 × 9.5 mm = 36.5 mm.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 73 74

Sem comentários

Jumo 705040 mTRON T - Router Module Operating Manual Manual do Utilizador Página 34